logo
Ein guter Preis.  online

Einzelheiten zu den Produkten

Zu Hause > Produkte >
Verbindungsstück des Ethernet-RJ45
>
Passive G.703 Balun Converter with Dual BNC and 2Mbps E1 Balun Converter for 75 Ohm to 120 Ohm Impedance Matching

Passive G.703 Balun Converter with Dual BNC and 2Mbps E1 Balun Converter for 75 Ohm to 120 Ohm Impedance Matching

Markenbezeichnung: NEW LIGHT
Modellnummer: NLG703-01
MOQ: 50 Stück
Preis: USD 4.50-9.80 / Piece
Verpackungsdetails: 1 Stück pro Antistatikbeutel, 100 Stück pro Exportkarton
Zahlungsbedingungen: T/T, L/C, Western Union,
Einzelheiten
Herkunftsort:
Guangdong, China
Zertifizierung:
CE, RoHS, ISO 9001
Produkttyp:
Passiver G.703-Balun-Konverter, 75 Ohm bis 120 Ohm
Schnittstelle A:
2 x BNC 75 Ohm unsymmetrisch (TX/RX)
Schnittstelle B:
1 x RJ45 120 Ohm symmetrisch, 4-adrig an Pins 1/2 und 4/5
Datenrate:
2,048 Mbit/s E1, 1,544 Mbit/s T1 kompatibel
Einfügedämpfung:
Unter 1,0 dB bei 1 MHz bis 3 MHz
Rückflussverlust:
Über 18 dB
Isolierung:
500 V DC zwischen Koax und Twisted Pair
Bit-Fehler-Rate:
Besser als 1E-10 über 300 m Cat5
Leistung:
Keine erforderlich (passiv)
Gehäuse:
ABS-Gehäuse, vernickelter BNC, vergoldeter Mittelstift
Betriebstemperatur:
-20 °C bis +70 °C
Anwendung:
E1-Amtsleitungen, PDH- und SDH-Knoten, PBX, SCADA, Basisstationsübertragung
Versorgungsmaterial-Fähigkeit:
20000 Stück pro Monat
Hervorheben:

G.703 Balun Converter Module

,

75 to 120 Ohm G.703 Balun

,

E1 Coax to UTP Adapter

Beschreibung des Produkts
Product Overview This G.703 balun converter matches the 75 Ohm unbalanced coax interface of E1 / T1 equipment to the 120 Ohm balanced twisted-pair interface used by routers, multiplexers and structured cabling. One RJ45 port carries the four-wire balanced signal while two BNC connectors present the transmit and receive coax pair, so PDH gear, DDF panels and SDH nodes can be linked over ordinary Cat5 twisted pair instead of twin coax. The unit is passive, epoxy sealed and
Ein guter Preis.  online

Einzelheiten Zu Den Produkten

Zu Hause > Produkte >
Verbindungsstück des Ethernet-RJ45
>
Passive G.703 Balun Converter with Dual BNC and 2Mbps E1 Balun Converter for 75 Ohm to 120 Ohm Impedance Matching

Passive G.703 Balun Converter with Dual BNC and 2Mbps E1 Balun Converter for 75 Ohm to 120 Ohm Impedance Matching

Markenbezeichnung: NEW LIGHT
Modellnummer: NLG703-01
MOQ: 50 Stück
Preis: USD 4.50-9.80 / Piece
Verpackungsdetails: 1 Stück pro Antistatikbeutel, 100 Stück pro Exportkarton
Zahlungsbedingungen: T/T, L/C, Western Union,
Einzelheiten
Herkunftsort:
Guangdong, China
Markenname:
NEW LIGHT
Zertifizierung:
CE, RoHS, ISO 9001
Modellnummer:
NLG703-01
Produkttyp:
Passiver G.703-Balun-Konverter, 75 Ohm bis 120 Ohm
Schnittstelle A:
2 x BNC 75 Ohm unsymmetrisch (TX/RX)
Schnittstelle B:
1 x RJ45 120 Ohm symmetrisch, 4-adrig an Pins 1/2 und 4/5
Datenrate:
2,048 Mbit/s E1, 1,544 Mbit/s T1 kompatibel
Einfügedämpfung:
Unter 1,0 dB bei 1 MHz bis 3 MHz
Rückflussverlust:
Über 18 dB
Isolierung:
500 V DC zwischen Koax und Twisted Pair
Bit-Fehler-Rate:
Besser als 1E-10 über 300 m Cat5
Leistung:
Keine erforderlich (passiv)
Gehäuse:
ABS-Gehäuse, vernickelter BNC, vergoldeter Mittelstift
Betriebstemperatur:
-20 °C bis +70 °C
Anwendung:
E1-Amtsleitungen, PDH- und SDH-Knoten, PBX, SCADA, Basisstationsübertragung
Min Bestellmenge:
50 Stück
Preis:
USD 4.50-9.80 / Piece
Verpackung Informationen:
1 Stück pro Antistatikbeutel, 100 Stück pro Exportkarton
Lieferzeit:
7 Werktage für Lagerbestände, 15–20 Tage für kundenspezifische Bestellungen
Zahlungsbedingungen:
T/T, L/C, Western Union,
Versorgungsmaterial-Fähigkeit:
20000 Stück pro Monat
Hervorheben:

G.703 Balun Converter Module

,

75 to 120 Ohm G.703 Balun

,

E1 Coax to UTP Adapter

Beschreibung des Produkts
Product Overview This G.703 balun converter matches the 75 Ohm unbalanced coax interface of E1 / T1 equipment to the 120 Ohm balanced twisted-pair interface used by routers, multiplexers and structured cabling. One RJ45 port carries the four-wire balanced signal while two BNC connectors present the transmit and receive coax pair, so PDH gear, DDF panels and SDH nodes can be linked over ordinary Cat5 twisted pair instead of twin coax. The unit is passive, epoxy sealed and